
Yesterday, I lastly tackled the factor that I’ve been dreading — putting in the Swedish ladder. That is an train equipment, additionally referred to as stall bars, that can be utilized to do a whole lot of various stretches and workouts. For those who’ve by no means heard of it earlier than, jump over to YouTube and search “stall bar workouts,” and you will get an concept of the way it’s used. This video is a very quick demonstration of about 75 totally different workouts that may be executed, however even that’s simply the tip of the iceberg.
I had initially deliberate to construct my very own Swedish ladder from scratch, however then I began to really feel a bit insecure about that. This stuff wants to have the ability to maintain full physique weight, and I felt significantly better about shopping for one which had a steel body and 1.5-inch-diameter bars. I ended up buying this one from The Beam Store.
After unpacking it and placing it collectively (with out tightening the entire bolts or screwing the bars into place), it regarded like this with the sunshine coloured bars.

I ended up sanding and marking the bars in order that the entire thing would go along with my “walnut and black” plan for the accents within the room. I received that executed a number of days in the past, after which the Swedish ladder continued to sit down on the ground as a result of I used to be so dreading the set up.
In my thoughts, the set up was going to be actually troublesome, however it will take an hour…or 90 minutes on the most. It ended up being a reasonably easy venture, nevertheless it took me 4 hours. 😀 Oh my gosh, this was such a protracted and drawn out course of. Nothing about it was significantly troublesome, nevertheless it simply took so lengthy as a result of I used to be figuring it out as I went alongside, and I principally put in it twice.
For apparent causes, the Swedish ladder must be secured to studs with lag screws. (I truly used one thing totally different, however extra on that under.) So after getting the entire thing put collectively once more (I had taken it aside to stain the bars), I had to determine how one can set up it on a wall the place the brackets on the Swedish ladder didn’t line up with the studs within the wall. The answer I got here up with was to make use of 2″ x 4″ lumber, safe that to the studs, after which connect the brackets on the Swedish ladder to the two″ x 4″ lumber.
As I’m certain , 2 x 4s aren’t the prettiest lumber. They’re tough, and the sides are rounded. I wished these to look fairly and completed. So earlier than I may even begin on the set up, I took the two x 4 to my desk noticed and lower off simply sufficient of every edge to take away these rounded corners and provides them good, non-rounded corners. After which I sanded the heck out of them, beginning with 80-grit sanding discs and dealing my means as much as 150-grit. As soon as these have been ready, I proceeded with the set up.
So with the Swedish ladder mendacity on the ground, I screwed the brackets onto the two x 4s, after which stood the entire thing up towards the wall. Whereas holding it in place towards the wall, I moved my ladder over in entrance of the Swedish ladder, received up onto my ladder, held the Swedish ladder in place with my head, after which had my fingers free to make use of my stud finder after which screw the two x 4 into the studs. It’s a must to get artistic when working by your self. 😀 Right here’s what it regarded like at that time.

I wished to get the whole lot in place, and get at the least two screws in to every 2 x 4 earlier than slicing the two x 4s to dimension and ending them. I used to be not sure about what to do with these 2 x 4s so far as the end. I had three choices. I may (1) paint them the wall coloration, (2) stain them the walnut coloration, or (3) paint them black.
So after I received it put in to the purpose that you just see above, I truly eliminated the Swedish ladder from the wall, eliminated the brackets, and eliminated the two x 4s from the wall in order that I may lower them to the precise width I wanted them to be and end them. At that time, I assumed I would stain them, and I wanted to try this after which allow them to dry earlier than reinstalling them.
However after eager about it extra, I made a decision to color them black in order that they’d appear like a part of the body. That meant that I may reinstall the unfinished 2 x 4s, after which paint them after they have been on the wall.
I didn’t use the lag screws that got here with the Swedish ladder. As a substitute, I used these HeadLOK screws, which I discover a lot simpler to make use of than lag screws. These don’t require pre-drilling, and so they received’t break up the wooden. They usually go in so simply.

They require a particular driver bit, however every package deal comes with the motive force bit, so it’s not a separate buy. Right here’s what the screw appears like. To safe the two x 4s to the studs, I used 4.5-inch screws.

These work so nicely, and so they snugged the two x 4 so securely to the studs, that I had three areas the place the drywall screws (or fairly, the drywall mud overlaying the drywall screws) popped out a bit. So these would require some sanding and contact up.

As soon as the two x 4s have been secured to the studs, I taped them off and gave them two coats of the identical black that I used on the closet partitions.

As soon as that was executed, reinstalling the Swedish ladder was pretty simple because the holes had been pre-drilled. I put in the brackets individually this time, and I used to be more than happy with the way it regarded with the black 2 x 4s.

After which I put the Swedish ladder again into place, secured the entire bolts, and tightened the whole lot very securely.

I’m certain {that a} put up about “how one can set up stall bars” will not be useful to anybody, however in case you can take away something from this put up, bear in mind these HeadLOK screws. Significantly, in case you ever have a venture that requires lag screws, seize the HeadLOK screws as an alternative. They’re a lot simpler to make use of, and they’re each bit as safe as lag screws.

I wasn’t assured in any respect going into this set up, however I’m very assured now that this Swedish ladder isn’t going anyplace. It’s extremely safe on that wall.

And I received it fairly near completely centered on that vast stripe as attainable, simply as deliberate. It’s enjoyable to see a plan come collectively.

And with that, the room is virtually completed. The entire massive tasks are executed, and I’ve a number of small issues left to do, like set up the sunshine within the entry, and set up the ceiling fan. Additionally, my mother hemmed the curtains for me, so I have to get these ironed and hung again up. Then I’ve a number of paint touchups, and that must be it! I’m hoping to point out y’all the ultimate residence fitness center, together with the entire earlier than and afters, early subsequent week.

Addicted 2 Adorning is the place I share my DIY and adorning journey as I transform and adorn the 1948 fixer higher that my husband, Matt, and I purchased in 2013. Matt has M.S. and is unable to do bodily work, so I do nearly all of the work on the home on my own. You may study extra about me right here.
I hope you’ll be part of me on my DIY and adorning journey! If you wish to comply with my tasks and progress, you may subscribe under and have every new put up delivered to your electronic mail inbox. That means you’ll by no means miss a factor!